Back to Blog
Double cylinder deadbolt5/20/2023 Use the below instructions to remove the appropriate deadbolt.ĭeadbolts using screw caps are easy to identify as there are two circular caps over the thru-bolts. The two methods used to conceal the thru-bolts are using screw caps or a faceplate. ![]() ![]() While I regularly received push message alerts, I was never able to get the auto-lock feature to engage.Schlage and Falcon double cylinder deadbolts have concealed screws to prevent tampering. Even with the hub installed, I found these features spotty. Those features don’t work (or at least they don’t work reliably), however, without a SwitchBot Mini Hub ($39), an external device that bridges the lock’s Bluetooth to your Wi-Fi network. You can also set the lock to send an alert to your phone if the door is left open and/or unlocked. ![]() An auto-lock option is available with separate options to lock after the door is shut or re-lock if the deadbolt is unlocked without opening the door. You’ll need to be in Bluetooth range, at which point you can manually open or shut the lock via a button on the app. Out of the box, your options for use are fairly limited since there’s no external access to the lock. Install the included magnetic sensor, and the lock will know if the door is open or closed. It can also be configured to automatically lock itself. The powerful motor never failed once at getting the lock to engage or disengage.Īpp screenshots, left to right: The app maintains a log of when the door is locked an unlocked. The lock I was testing on was rather stiff, and I predicted the SwitchBot’s motor would struggle to turn the deadbolt. I had the lock up and running within about 10 minutes, including the time it took to adjust the metal spacer. The app uses your phone’s Bluetooth connection to find and pair with the lock automatically, running you through a calibration process and firmware update before it’s ready to go. SwitchBot has always offered a streamlined and simple setup process for its products, and the SwitchBot Lock is no different. The system is powered by two 3-volt batteries, which come preinstalled the company says they should last six months if the lock is used an average of 10 times a day. (The manual suggests waiting 24 hours before using the device.) A small magnetic sensor is also included so the system can detect if the door is open or closed, but it’s optional. Once you’ve made these adjustments, your final step is to attach the mechanism to the door with double-sided tape. It wasn’t a perfect fit, but it worked fine in my testing. So rather than engage a thumb turn, I needed the SwitchBot to engage the key on the interior side of the door. ![]() Three adapters are included, and I ended up using the smallest because my test door had a double cylinder deadbolt, meaning it required a key on both the exterior and interior side of the door. The only other real decision you must make is choosing the proper adapter to align with the size of your thumb turn. (A screwdriver is included.) On the test door I was using, this meant extending the spacer nearly as far as it would reach, over an inch offset from the door. This is accomplished by detaching the battery cover and adjusting a metal spacer underneath, which is accomplished by removing and replacing four small screws that hold it in place. The most complex part of the process is adjusting the height of the lock so that it’s the right distance from the thumb turn. The SwitchBot Lock is designed to be simple, and for the most part it is. $192.26 at Amazon | $199.00 at Best Buy Installing the SwitchBot Lock
0 Comments
Read More
Leave a Reply. |